Skip to content

Applied Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q51 Easy

What is the primary goal of optimization in applied engineering?

Maximizing efficiency and performance
Minimizing production costs
Improving safety and reliability
Reducing environmental impact
Q52 Easy

Which law of motion states that for every action, there is an equal and opposite reaction?

Newton's first law of motion
Newton's second law of motion
Newton's third law of motion
Law of conservation of momentum
Q53 Easy

The unit of rotational inertia of a body in the C.G.S system is

Cm4
Kg.cm²
Gm.cm²
Gm.cm3
Q54 Easy

A cube on a smooth horizontal surface

Cannot be in stable equilibrium
Cannot be in neutral equilibrium
Cannot be in unstable equilibrium
Can be in any of these states
Q55 Easy

What is the unit of force in the International System of Units (SI)?

Newton (N)
Kilogram (kg)
Joule (J)
Pascal (Pa)
Q56 Easy

The maximum pull in a cable, carrying a uniformly distributed load and supported at two ends that are at the same level, is at

Supports
Quarter span
Midspan
None of the above
Q57 Easy

What is the purpose of feasibility studies in applied engineering?

To determine the technical viability of a project
To estimate the cost of the project
To assess the environmental impact of the project
To evaluate the market potential of the project
Q58 Easy

A geostationary satellite is one that orbits the earth with a velocity of rotation of

Moon
Earth
Sun
Pole
Q59 Easy

The centre of gravity of a homogenous body is the point at which the whole

The volume of the body is assumed to be concentrated
The area of the surface of the body is assumed to be concentrated
The weight of the body is assumed to be concentrated
All the above
Q60 Easy

What does statistics deal with?

The motion and behaviour of particles in a gas
The nature and behaviour of waves
The equilibrium of a system of fluids
Forces operating on and in a body at rest
Q61 Easy

The velocity of a moving body is

A vector quantity
A scalar quantity
A constant quantity
None of these
Q62 Easy

The angular speed of a car taking a circular turn of a radius of 100 m at 36 km/hr will be

0.1 rad/sec
1 rad/sec
10 rad/sec
100 rad/sec
Q63 Easy

What does the mass of an object also help identify?

The temperature of the object
The temperature at which the object is hottest
The shape of the object
The strength of the object's gravitational attraction to other bodies
Q64 Easy

What is the purpose of prototyping in the engineering design process?

To create a final product for mass production
To evaluate and refine the design concept
To test the product under extreme conditions
To gather customer feedback
Q65 Easy

A bullet weighing 200 g is fired horizontally with a velocity of 25 m/sec from a gun carried on a carriage which together with the gun weighs 100 kg. The velocity of recoil of the gun, will be

0.05 m/sec
1.00 m/sec
1.5 m/see
0.01 m/sec
Q66 Easy

Which of the following is not a primary step in the engineering design process?

Analysis
Testing
Documentation
Implementation
Q67 Easy

The condition of equilibrium for any system of forces in a plane is

That polygon of forces must close
That resultant couple must be zero
Both (and (b)
None of the above
Q68 Easy

What is the principle stating that the total momentum of a closed system remains constant if no external forces act on it?

Newton's first law of motion
Newton's second law of motion
Newton's third law of motion
Law of conservation of momentum
Q69 Easy

Joule is the unit of

Work
None of these
Force
Torque
Q70 Easy

A retarding force on a body does not

Change the motion of the body
Retard the motion of the body
Introduce the motion of the body
None of these
Q71 Easy

The time period of a simple pendulum depends on

Mass of suspended particle
Length of the pendulum
Acceleration due to gravity
Both b and c
Q72 Easy

Which engineering discipline focuses on the design and development of electrical systems and components?

Electrical engineering
Aerospace engineering
Software engineering
Biomedical engineering
Q73 Easy

What can change the state of an object?

Speed
A force
Time
Temperature
Q74 Easy

The total time of collision and restitution of two bodies is called

Time of collision
Period of collision
Period of impact
All the above
Q75 Easy

What is the main goal of quality control in applied engineering?

Minimizing production costs
Maximizing customer satisfaction
Reducing manufacturing time
Improving employee morale
Q76 Easy

If a force has both magnitude and direction, what is it called?

A displacement vector
A force field
A magnitude
A vector quantity
Q77 Easy

A block in the shape of a parallelepiped of sides lm x 2m x 3m lies on the surface. Which of the faces gives the maximum stable block ?

1 m x 2 m
2 m x 3 m
1 m x 3m
Equally stable on all faces
Q78 Easy

What is the role of computer-aided design (CAD) software in applied engineering?

Simulation of engineering processes
Analysis of complex data sets
Visualization of design concepts
Automated manufacturing
Q79 Easy

For a self-locking machine, the efficiency should be

Less than 60%
50 %
More than 50%
None of these
Q80 Easy

Periodic time of body moving with simple harmonic motion is

Directly proportional to its angular velocity
Directly proportional to the square of its angular velocity
Inversely proportional to the square of its angular velocity
Inversely proportional to its angular velocity
Q81 Easy

Which type of engineering is concerned with the design and operation of transportation systems?

Transportation engineering
Aerospace engineering
Chemical engineering
Nuclear engineering
Q82 Easy

What is the work done on an object when a force is applied to it, but the object does not move?

Zero work
Positive work
Negative work
None of the above
Q83 Easy

The angular speed of a car while taking a circular turn of radius 100m at 36 km/hour, is

0.1 radian/sec
1 radian/sec
100 radian/sec
1000 radian/sec
Q84 Easy

A particle moving with a simple harmonic motion attains its maximum velocity when it passes

The extreme point of the oscillation
Through the mean position
Through a point at half amplitude
None of these
Q85 Easy

A force P of 50 N and another force Q of unknown magnitude act at 90° to each other. They are

Balanced by a force of 130 N. The magnitude of Q is
60 N
80 N
120 N
Q86 Easy

A heavy ladder resting on the floor and against a vertical wall may not be in equilibrium if

The floor is smooth and the wall is rough
The floor is rough and the wall is smooth
Both floor and wall are rough
Both floor and wall are smooth
Q87 Easy

At a given instant the ship is travelling at 6 km/h due east and the ship is travelling at 8 km/h due north. The velocity relative to is

7 km/hrs
2 km/hrs
1 km/hrs
10 km/hrs
Q88 Easy

A rod AB carries three loads of 30 N, 70 N and 100 N at distances of 20 mm, 90 mm and 150 mm respectively from A. Neglecting the weight of the rod, the point at which the rod will balance is

109.5 mm from A
119.5 mm from A
125.5 mm from A
132.5 mm from A
Q89 Easy

What is referred to as the minimum length between the body's initial to the final location?

Velocity
Displacement
Tension
Movement
Q90 Easy

Which type of engineering involves the application of principles from both mechanical and electrical engineering?

Mechatronics engineering
Chemical engineering
Environmental engineering
Biomedical engineering
Q91 Easy

If the given forces P,, P2, P3 and P4 are such that the force polygon does not close, then the system will

Be in equilibrium
Always reduce to a resultant force
Always reduce to a couple
Both (and (c)
Q92 Easy

The unit of Moment of Inertia of a body, is

M3
M4
None of these
M
Q93 Easy

A stone of mass 1 kg is tied to a string of length 1 m and whirled in a horizontal circle at a constant angular speed of 5 rad/sec. The tension in the string is,

5 N
10 N
15 N
25 N
Q94 Easy

The unit of force in the C.G.S. system of units is called

Dyne
Newton
Kg
All the above
Q95 Easy

When a body in equilibrium undergoes an infinitely small displacement, work imagined to be done, is known as

Imaginary work
Negative work
Virtual work
None of these
Q96 Easy

Which type of engineering is concerned with the design and operation of energy systems?

Energy engineering
Materials engineering
Environmental engineering
Nuclear engineering
Q97 Easy

What is the relationship between force, mass, and acceleration, as described by Newton's second law of motion?

F = m × a
F = m / a
F = m + a
F = m - a
Q98 Easy

What is applied engineering?

The application of scientific and mathematical principles to practical engineering problems.
The theoretical study of engineering concepts.
The development of new engineering theories.
The management of engineering projects.
Q99 Easy

When two forces, each equal to P, act at 90° to each other, then the resultant will be

P
PV2
P/V2
2P
Q100 Easy

Which type of engineering deals with the design and improvement of manufacturing processes?

Industrial engineering
Aerospace engineering
Environmental engineering
Materials engineering
Showing 100 of 115 questions

Teachers: using these Applied Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?