Skip to content

IC Engine (Internal Combustion Engine) MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q51 Easy

What is idling?

Engine running without a load at the highest speed possible.
Engine running with a load at the lowest speed possible.
Engine running without a load at the lowest speed possible.
Engine running at the highest speed possible.
Q52 Easy

What does the word "laminated" mean?

Made of thin layers
Covered in a sticky substance
To beat severely
Having a smooth surface
Q53 Easy

What is the ratio of brake horsepower to indicated horsepower?

Horsepower
Indicated horsepower
Mechanical efficiency
Brake horsepower
Q54 Easy

What is a shim?

A thin metal sheet used to fill in spaces between objects.
A tool used to sharpen knives
A type of bread
A unit of measurement.
Q55 Easy

What is a unit of energy equal to a continuous flow of one kilowatt for one hour?

Kilowatt
Watt-hour
Joule
Kilowatt-hour
Q56 Easy

What is the main purpose of a lubricant?

To reduce friction
To stop motion
To increase friction
To create motion
Q57 Easy

What is the unit of heat?

Calorie (cal)
Watt (W)
Joule (J)
British thermal unit (Btu)
Q58 Easy

What is a governor?

A mechanism used to control the speed of an engine.
A device that closes and opens a valve
A state official with ranking authority
A machine that produces rotary motion
Q59 Easy

What is the term for a value in an equation which does not change?

Constant
Variable
Function
Term
Q60 Easy

What does a keeper dowel or pin do?

Keep piston rings from moving from an assigned position
Provide extra support for the piston rings
Keep the piston rings from expanding
Keep the piston rings lubricated
Q61 Easy

In an engine, combustion takes place in which part?

Connecting Rod
Crankshaft
Carburetor
Cylinder
Q62 Easy

What is the term for the support on which a lever turns?

Weight
Point
Fulcrum
Center
Q63 Easy

What is a violent uncontrolled burning of a fuel in the combustion chamber called?

Explosion
Ignition
Combustion
Detonation
Q64 Easy

What is combustion in a cylinder so fast that there is no change in volume called?

Parallel combustion
Spontaneous combustion
Controlled combustion
Constant-volume combustion
Q65 Easy

What is a connecting rod bearing?

The bearing located in the large end of the connecting rod by which it is attached to the crankshaft.
The bearing located in the large end of the connecting rod by which it is attached to the piston.
The bearing located in the large end of the connecting rod by which it is attached to the cylinder.
The bearing located in the small end of the connecting rod by which it is attached to the crankshaft.
Q66 Easy

In most engines, the head of the intake valve is _______ the head of the exhaust valve.

Much smaller than
A different shape than
Slightly larger than
The same size as
Q67 Easy

What is the function of an exhaust valve?

The valve through which the unburnt gases are allowed to pass out to the intake manifold.
The valve through which the unburnt gases are allowed to pass out to the exhaust manifold.
The valve through which the unburnt gases are allowed to pass out to the cylinder head.
The valve through which the burnt gases are allowed to pass out to the exhaust manifold.
Q68 Easy

What is an exhaust pyrometer?

A machine used to generate exhaust
An instrument used to measure the temperature of the exhaust
A tool used to mix exhaust
A device used to measure the amount of exhaust
Q69 Easy

What is efficiency?

The amount of work done
The ratio of output over input.
The rate at which work is done
The quality of work done
Q70 Easy

What is the cylinder head?

The part which covers and seals the end of the cylinder and usually contains the pistons.
The part which covers and seals the end of the cylinder and usually contains the spark plugs.
The part which covers and seals the end of the engine and usually contains the valves.
The part which covers and seals the end of the cylinder and usually contains the valves.
Q71 Easy

What is heat?

A form of energy
A lightbulb
The element of fire
A measure of hotness
Q72 Easy

What is the function of an injection pump?

Inject water into the radiator
Fill the tires with air
Inject oil into the transmission
Inject fuel oil into the combustion space of a diesel engine
Q73 Easy

What is distillation?

A process of making metal stronger
A process of making alcohol
Separation of the more volatile parts of a liquid from those less volatile by vaporization and subsequent condensation.
A type of rock found near the equator
Q74 Easy

One horsepower is equal to ____?

1,000 ft-lb. per min.
33,000 ft-lb. per min.
30,000 ft-lb. per min.
15,000 ft-lb. per min.
Q75 Easy

What is the unit in which work is measured?

Watt
Newton
Foot pound
Joule
Q76 Easy

What is the purpose of a jacket surrounding an engine cylinder?

To reduce engine noise
To increase engine speed
To improve engine performance
To permit circulation of cooling water
Q77 Easy

Inertia is the tendency of a body to ______?

Speed up
Maintain its existing velocity
Slow down
Stop
Q78 Easy

What is linear motion?

Motion that is not changing.
Motion in a curved line.
Motion in a straight line.
Motion at a constant speed.
Q79 Easy

What is friction?

The force that causes two surfaces to slide past each other.
The force that one object exerts on another object.
A measure of the amount of wear on a surface.
The resistance to relative motion between two bodies in contact.
Q80 Easy

What is the crankshaft?

The electrical system that powers an engine
The middle part of the engine structure surrounding the working parts.
The system in charge of cooling an engine
The working part of an engine that creates energ
Q81 Easy

What does EMF stand for?

Energy management factor
Environmental management factor
Electric magnetic field
Electromotive force
Q82 Easy

What does the term "hydraulic" pertain to?

Movement of and by air
Movement of and by earth
Movement of and by water, also by other liquids, such as oils.
Movement of and by fire
Q83 Easy

What is the crankshaft web?

The part of the crankshaft that transmits power to the flywheel
The part of the crankshaft that supports the connecting rods
The part of the engine that turns the crankshaft
The part of the crankshaft between the bearings
Q84 Easy

What is contraction?

Expansion
Remaining the same size
Becoming smaller in size
Becoming larger in size
Q85 Easy

What does an engine do?

Pumps water
Cuts wood
Produces power to do work
Burns coal
Q86 Easy

What is the act of discharging gases from an engine after they have done work called?

Gases
Engine
Discharge
Exhaust
Q87 Easy

The expansion period is the portion of the power stroke during which:?

The spark plug fires.
The engine is idling.
The combustion gases expand from the movement of the piston and thus do work.
The piston is at the top of its stroke.
Q88 Easy

What is an Indicator?

An animal that gives warning of the approach of danger.
Measure of central tendency
A photographic film
Instrument used to investigate the pressures inside an engine cylinder.
Q89 Easy

What is the crankpin?

A mechanical device that changes rotary motion into linear motion
That part of the crank to which the connecting rod is attached.
A bicycle
An rod that goes through the middle of the crankshaft
Q90 Easy

What is the inlet cam?

The cam that controls the operation of the intake valve in a four-stroke engine.
The cam that controls the operation of the air intake valve in a two-stroke engine.
The cam that controls the operation of the air inlet valve in a four-stroke engine.
The cam that controls the operation of the exhaust valve in a four-stroke engine.
Q91 Easy

What is the lower portion of the engine structure called?

Crankcase subbase
Crankshaft
Piston
Bedplate
Q92 Easy

What is Fluctuation?

Oscillation
Upheaval
Alteration
Variation in value
Q93 Easy

What is the function of the fuel pump?

Injects the fuel into the engine
Stores the fuel
Start the engine
Delivers the fuel to the injector
Q94 Easy

What is the useful output of an engine at a given moment?

Speed
Horsepower
Load
Torque
Q95 Easy

What is the exhaust cam?

A kind of fuel
The cam that controls the operation of the exhaust valve.
A type of engine
The cam that controls the operation of the intake valve.
Q96 Easy

What does MEP stand for?

Mean Effective Pressure
Minimum Efficiency Pressure
Mean Endurance Pressure
Main Engine Pump
Q97 Easy

Which of the following is not a property of the delivery stroke?

The stroke of a pump during which the fluid in the pump is forced out of the cylinder.
The stroke of a pump during which the fluid in the pump enters the cylinder.
The stroke of a pump during which the fluid in the pump is forced into the cylinder

Teachers: using these IC Engine (Internal Combustion Engine) questions with a class? Tell us about your class.

Report a mistake

What's wrong?