Skip to content

Structural Design MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q51 Easy

What is the radius of curvature?

The inverse of the curvature, 1/R
The quantity defined by the curvature, R
The amount of curvature, 1/R
The amount of curvature, R
Q52 Easy

What is the definition of "lacing"?

A structural element of a shirt
A type of shoe
A decoration for a cake
Together.
Q53 Easy

What is the design stress range?

Difference in stress between the lowest and highest values attained during loading
Pressure that can be safely applied to the material without causing fracture
Magnitude of change in stress due to the repeated application and removal of service live loads.
Magnitude of external force that can be applied safely to the material without causing permanent damage
Q54 Easy

What does Flexure mean?

Changing shape in response to an applied force
A type of fracture that occurs in long bones
A softening of the bones due to lack of calcium
Bending deformation
Q55 Easy

What is a beam-column?

A unit of force.
A device used to measure bending moment.
A device used to measure axial force.
A structural member that resists both axial force and bending moment.
Q56 Easy

What is the main purpose of a cover plate?

To increase the strength of the member.
To increase cross-sectional area, section modulus or moment of inertia.
To make the member more durable.
To provide extra support to the member.
Q57 Easy

What is a collector?

An element that transfers load from a diaphragm to a resisting element
An element that connects two members and distributes the load between them
An element that is used to change the direction of a member
An element that connects two or more members end to end and supports the applied load
Q58 Easy

What is the primary force that diagonal bracing carries?

Torsion force
Axial force
Shear force
Compressive force
Q59 Easy

What is an indeterminate structure?

A structure with fewer unknown reactions than static equations
A structure with more unknown reactions than static equations
A structure with fewer known reactions than static equations
A structure with more known reactions than static equations
Q60 Easy

What is the unit of gravity?

Attractive force
Acceleration
Force
Mass
Q61 Easy

What is the primary function of a column?

To support a beam.
To provide lateral stability.
Resisting axial force.
To resist wind loads.
Q62 Easy

What is a distributed load?

An internal force which acts over a length or an area.
A load which is spread out over an area.
An external force which acts over a length or an area.
A force which is evenly distributed over an area.
Q63 Easy

What is the product of a load factor and the nominal load called?

Load factor
Factored load
Product load
Nominal load
Q64 Easy

What is the definition of effective length?

Length of an otherwise identical column with the same strength when analyzed
With fixed end conditions.
The length of the column multiplied by the sine of the angle between the column and the base.
Length of an otherwise identical column with the same strength when analyzed with pinned end conditions.
Q65 Easy

What is the allowable stress?

The sum of the allowable strengths
Dividing the allowable strength by the appropriate section property
Allowable strength divided by the appropriate section property
Allowable strength multiplied by the appropriate section property
Q66 Easy

What is the definition of drift?

Lateral deflection of structure due to lateral wind or seismic load.
Rotation of a structure due to wind or seismic load.
Vertical movement of a structure due to wind or seismic load.
Lengthwise movement of a structure due to wind or seismic load.
Q67 Easy

What is an external force?

A force created by an object
A force that cannot be measured
A force not acting on an object
A force acting on an object
Q68 Easy

What is ASD?

Allowable Strength Design
Required Strength Design
Actual Strength Design
Average Strength Design
Q69 Easy

Beyond which point is deformation of a material plastic?

Ultimate stress
Proportional limit
Elastic limit
Yield point
Q70 Easy

What is the limit state of crack initiation and growth resulting from repeated application of live loads called?

Ductility
Buckling
Fatigue
Fracture
Q71 Easy

What is horizontal shear?

Force at the interface between two different types of steel
Force at the interface between two different types of concrete.
Force at the interface between steel and concrete surfaces in a composite beam.
Force at the interface between two different types of wood
Q72 Easy

What is design strength?

Resistance factor
Nominal strength
Resistance factor multiplied by the nominal strength, øRn.
øRn
Q73 Easy

What is the definition of allowable strength?

Nominal strength added to the safety factor.
Nominal strength subtracted by the safety factor.
Nominal strength divided by the safety factor.
Nominal strength multiplied by the safety factor.
Q74 Easy

What is the definition for Inertia?

Force required to change the state of motion of an object.
Tendency of objects at rest to remain at rest and objects in motion to remain in motion.
A measure of an object's resistance to changes in its motion.
Q75 Easy

What does it mean if a material is elastic?

It returns to its original geometry upon unloading.
It is stretchy.
It does not return to its original geometry upon unloading.
It is flexible.
Q76 Easy

What is a horizontal diaphragm?

A deck supported by posts
A structure that supports a bridge
A floor or roof deck to resist lateral load.
A wall that supports a roof
Q77 Easy

What does base shear refer to?

The vertical distance between the base of a structure and its centre of gravity
A type of construction in which the weight of the superstructure is supported by a number of relatively slender columns
A lateral (wind or seismic) force acting at the base of a structure.
The structural support that transmits the weight of the superstructure to the foundation
Q78 Easy

What does Inelastic (plastic) strain imply?

Strain hardening
Reversible deformation
Permanent deformation
No permanent deformation
Q79 Easy

What is a fitted bearing stiffener used for?

To support or concentrate load
To connect two flanges of a beam
To transmit load through bearing
To allow movement between two surfaces
Q80 Easy

What is a gusset plate?

A device used to measure strain
A steel plate used to provide extra support in construction
Plate element connecting truss members of a strut or brace to a beam or column.
A type of truss member
Q81 Easy

What is meant by axial force?

A force that is acting along the longitudinal axis of a structural member.
A force that is acting along the longitudinal axis of a structural member and perpendicular to it.
A force that along the longitudinal axis of a structural member and parallel to it.
A force that is acting along the length and width of a structural member
Q82 Easy

What does a braced frame do?

It only provides stability for the structural system.
It only provides resistance to lateral forces.
It provides resistance to lateral forces and provides stability for the structural system.
It provides resistance to both lateral and vertical forces.
Q83 Easy

What does the acronym ASD refer to in the context of design load?

Allowable Stress Design
Area Structural Detail
Average Static Deflection
American Society of Civil Engineers
Q84 Easy

What is a concentrated load?

A force that is not evenly distributed
A load that acts at a single point
A load that is evenly distributed
An external concentrated force

Teachers: using these Structural Design questions with a class? Tell us about your class.

Report a mistake

What's wrong?