Skip to content

Finite Element MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q101 Easy

The force required to produce unit displacement is

Pressure
Traction
Stiffness
None
Q102 Easy

A symmetric matrix is called ____________, if all its Eigenvalues are strictly positive i.e., greater than zero.

Negative definite
Co- definite
Positive definite
Alternative definite
Q103 Easy

The determinant of an element stiffness matrix is always

3
2
0
Q104 Easy

Domain is divided into some segments called

Finite element
Stiffness matrix
Node function
Shape function
Q105 Easy

Using elementary row operations, a matrix can always be transformed into an upper triangular matrix.

TRUE
FALSE
Can be true or false
Can not say
Q106 Easy

Is defined as the ratio of the largest dimension of the element to the smallest dimension.

Element depth ratio
Mode shape ratio
Aspect ratio
None of the above
Q107 Easy

Number of shape functions in two noded beam element are

2
3
4
6
Q108 Easy

Discretization includes __________ numbering.

Element and node
Only nodal
Only elemental
Either nodal or elemental
Q109 Easy

A (A^-1)=(A^-1)A is a condition for ________

Singular matrix
Nonsingular matrix
Matrix inversion
Adjoint of matrix
Q110 Easy

Which of the following properties define a singular matrix?

The matrix is square
It does not have an inverse
It has a determinant of 0
All of the above
Q111 Easy

Gaussian elimination is a name given to a well known method of solving simultaneous equations by successively eliminating _________.

Variables
Equations
Unknown
Algorithms
Q112 Easy

In linear elasticity, the relation between stress and strain depend on the type of material under consideration

TRUE
FALSE
Can be true or false
Can not say
Q113 Easy

Which is not the characteristic of a Flat shell element?

The Flat shell element must plane, i.e., the coordinates of the element nodes must be in one plane.
Force loads F may act in any direction between perpendicular to the plane and in the plane
Moment loads M must act in the plane of the element.
They must be thick and the variation of stresses take place along the thickness of element
Q114 Easy

From where does the global load vector F is assembled?

Element force vectors only
Point loads only
Both element force vectors and point loads
Undefined
Q115 Easy

For thermal analysis, the field variable is

Stress
Strain
Displacement
Temperature
Q116 Easy

The art of subdividing a structure into a convenient number of smaller components isCalled

Discretization
Numbering of nodes
Continuum
Both a & b
Q117 Easy

The values obtained at boundaries of the structure are called as ________________.

Boundary Conditions
Boundary Values
Both a & b
None of these
Q118 Easy

Principal stresses and their directions are calculated by using ____

Galerkin approach
Rayleigh method
Potential energy method
Mohr’s circle method
Q119 Easy

The truss element is a _____ when we see it in a local coordinate system.

Three dimensional
One dimensional
Two dimensional
Thermal component
Q120 Easy

For CST element, if N1=0.3 and N2-0.2 what is the value of N3

0.6
0.4
0.7
0.5
Q121 Easy

The art of subdividing the structure into a convenient number of smaller elements is known as ___________.

Assemblage
Continuum
Traction
Discretization
Q122 Easy

The local x-axis of a member is always parallel to the ____ of the member.

Longitudinal axis.
Vertical axis.
Transverse axis.
Horizontal axis.
Q123 Easy

Which of the following is true for the stiffness matrix (K)?

K is a banded matrix
K is unsymmetric
K is an un-banded matrix
K is tri-symmetric
Q124 Easy

If the length of element is 5mm , cross section area is 20 mm2 and E is 210 GPa, the axial stiffness is

5x210000000/20
5x20/210000000
20x210000000/5
None of the given options
Q125 Easy

Numerical integration methods can generally be described as combining evaluations of the integrand to get an approximation to the integral. The integrand is evaluated at a finite set of points called?

Quadrature point
Composite point
Midpoint
Integration point
Q126 Easy

What does an interpolation function represent?

Change in variable over an element
Change in variable over the whole domain.
Shape of the element.
Shape of the whole domain.
Q127 Easy

What is a banded matrix?

Sparse matrix
Rectangular matrix
Unit matrix
Square matrix
Q128 Easy

The sum of the shape function is equal to

0.5
1
2
Q129 Easy

Global nodes corresponds to _______

Entire body
On surface
On interface
On element
Q130 Easy

LST element has ________nodes.

3
4
5
6
Q131 Easy

Which of the following approaches is not used in FEM?

Elimination Approach
Penalty Approach
Direct Stiffness Method
None of these
Q132 Easy

In one dimensional problem, each node has _________ degrees of freedom.

2 degrees of freedom
3 degrees of freedom
No degrees of freedom
1 degree of freedom
Q133 Easy

Types of Boundary conditions are ______

Potential- Energy approach
Penalty approach
Elimination approach
Both penalty approach and elimination approach
Q134 Easy

What is a shape function?

Interpolation function
Displacement function
Iterative function
Both interpolation and displacement function
Q135 Easy

Number of shape functions for 3D hexahedron element with nodes at corners only in natural coordinate system are

2
4
6
8
Q136 Easy

Gaussian elimination method can also be used to find the ?

To calculate the determinant of a matrix
To calculate the inverse of an invertible square matrix
Rank of a matrix
All of the above
Q137 Easy

From the following, which type of element is not three dimensional?

Hexahedron
Quadrilateral
Rectangular prism
Tetrahedron
Q138 Easy

The isoparametric representation of finite elements is defined as element geometry and displacements are represented by the same set of shape functions.

Yes
No
Can be yes or no
Can not say
Q139 Easy

Principle of the stationary value of the potential energy is also called as

Principle of virtual work
Principle of work energy
Principle of conservation momentum
Principle of minimum potential energy
Q140 Easy

A triangular plane stress element has_________degree of freedom

3
4
5
6
Q141 Easy

The numbers of node for 1 D element are

1
2
3
Q142 Easy

For constant strain triangle element, the shape function is

N1+N2+N3=1
N1+N2+N3=0
N1+N2+N3=3
N1+N2+N3=4
Q143 Easy

In variational principles, which of the following quantities are to be used.

Scalar
Vector
Both Scalar and Vector
Q144 Easy

By the Galerkin approach equation can be written as __________

{P}-{K}{Δ}=0
{K}-{P}{Δ}=0
{Δ}-{p}{K}=0
Undefined
Q145 Easy

For truss analysis, which type of elements is used?

Triangle
Parallelogram
Rectangle
Bar
Q146 Easy

For 2 dimensional elements, the degree of freedom per node is __.

1
2
Indefinite
Q147 Easy

If natural coordinates xi=0.5, eta=0.6, the values of shape functions of four noded Isoparametric rectangular element in natural coordinates are

0.5, 0.15, 0.6, 0.2
0.05, 0.5, 0.6, 0.2
0.05, 0.15, 0.6, 0.2
0.5, 0.5, 0.6, 0.2
Q148 Easy

Local node number corresponds to ______________

Entire body
On element
On interface
On surface
Q149 Easy

First derivatives of the three node elements are called as,

CST
LST
VST
None
Q150 Easy

_________ are used to express the geometry or shape of the element.

Mode shapes
Shape functions
Natural curves
Artificial curves
Showing 150 of 295 questions

Teachers: using these Finite Element questions with a class? Tell us about your class.

Report a mistake

What's wrong?