Skip to content

Finite Element MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q201 Easy

In 1D steady state problems, at x = x0, T = T0 is a

Natural boundary condition
Forced boundary condition
None of this
Both
Q202 Easy

In the FEA of a fluid mechanics problem, we need to find .

Stress distribution
Heat flux distribution
Pressure distribution
All of the abov
Q203 Easy

Shape function is just a ___________

Displacement function
Equation
Interpolation function
Matrix function
Q204 Easy

In the penalty approach evaluate _______ at each support.

Load vector
Degrees of freedom
Force vector
Reaction force
Q205 Easy

There are ________ simplest element types for 3D elements.

1
2
3
4
Q206 Easy

The ratio of the largest dimension of the element to the smallest dimension is defined as

Aspect ratio
Shape ratio
Element ratio
Mode shape
Q207 Easy

In the local coordinate system ________case letters are preferred.

Upper
Lower
Both a & b
None
Q208 Easy

The final global finite element equation for the complete structure can be written in the Matrix form,

{F}=[k]+{u}
{F}=[k]-{u}
{F=[k]{u}
{F=[k]/{u}
Q209 Easy

Det(A-λI)=0 is a ________

Characteristic equation
Matrix equation
Inversion of matrix
Cholesky’s equation
Q210 Easy

The shape function has

Zero value at one nodal point and unit value at other nodal points.
Value varying from minus 1 to plus 1
Unit value at all nodes
Unit value at one nodal point and zero value at other nodal points.
Q211 Easy

FEA solution_____ energy when compared to its exact solution.

Over predicts.
Under predicts.
Exactly predicted.
None of these.
Q212 Easy

Which of the following options is a 3D FEA element?

Tetrahedron.
Wedge.
Hexahedron.
All of these
Q213 Easy

How many nodes are there in a tetrahedron element?

3
4
5
6
Q214 Easy

Range of Poisson’s ratio for metals is _____________ .

0.25 – 0.33
0.22 – 0.45
0.22 – 0.25
0.25 – 0.50
Q215 Easy

In the FEA of a fluid mechanics problem, we need to find _______.

Stress distribution
Heat flux distribution
Pressure distribution
Power distribution
Q216 Easy

A diagonal matrix with zeros as elements except for the diagonal, which was once known as?

Identity matrix
Scalar matrix
Vector matrix
Transpose matrix
Q217 Easy

A truss structure consists only of ___ force members.

Only one
Two
Three
Poly
Q218 Easy

No of coefficients in an displacement function are equal to

No. of nodes x dof per node
Total no of degrees of freedom x degree of the equation
Rigid body displacement term plus total degrees of freedom
Degrees of freedom per node.
Q219 Easy

When can we use axisymmetric governing equations?

Cross-section, and loading conditions are axisymmetric.
Boundary Conditions are axisymmetric
Material properties are axisymmetric.
All the options are correct
Q220 Easy

Variational principle is the basis for

Displacement method
Weighted residual method
Finite difference method
Finite volume method
Q221 Easy

Axis-Symmetric element is Element

1D
2D
3D
4D
Q222 Easy

Unidirectional fibre- reinforced composites also exhibit _______ behaviour.

Isotropic
Orthotropic
Material
Unidirectional composite
Q223 Easy

The strain-stress relation for orthotropic linear elastic materials can be written in Voigt notation.

TRUE
FALSE
Can be true or false
Can not say
Q224 Easy

To solve the FEM problem, it subdivides a large problem into smaller, simple parts that are called

Static Elements
Dynamic Elements
Infinite Elements
Finite Elements
Q225 Easy

Heat transfer problem depends on

Thermal conductivity
Heat coefficient
Ambient temperature
All
Q226 Easy

From below, choose the condition for the axisymmetric element.

Symmetric about axis
Boundary conditions are symmetric about an axis
Loading conditions are symmetric about an axis
All the above
Q227 Easy

The degrees of freedom for regular flat shell elements are

Three translations and two rotations
Three translations and three rotations
Two translation and two rotations
One translation normal to plane and two rotations
Q228 Easy

The following integral formulation is used in weighted residual method. Identify the form of integral

Linear form
Bilinear Form
Quadratic Form
Cubic Form
Q229 Easy

For quadrilaterals with 2X2 integration gives _____ sets of stress values.

1
2
3
4
Q230 Easy

A positive definite symmetric matrix A can be decomposed into form A=LL T this decomposition is called ________

Cholesky
Rayleighs
Galerkins
Potential energy
Q231 Easy

A matrix with 4 rows and 2 columns can be subtracted to a matrix with 5 rows and 2 columns.

TRUE
FALSE
Can be true or false
Can not say
Q232 Easy

The variational principle corresponding to the weak form of elasticity is called as

Theorem of minimum potential energy
Theorem of maximum potential energy
Theorem of least square
All theorems
Q233 Easy

For thermal analysis, the field variable is _________.

Stress
Strain
Displacement
Temperature
Q234 Easy

A small unit having definite shape of geometry and node is known as

Discrete element
Finite element
Assembled element
Infinite element
Q235 Easy

The displacement function U for 1 dimensional two node linear element using standard notations in terms of shape function will be

U equals to N1X1 plus N2X2
U equals to N2X1 plus N1X2
U equals to N1U2 plus N2U1
U equals to N1U1 plus N2U2
Q236 Easy

The higher ordered elements are also called as ____________________

Complex Elements
Compound Elements
Linear Elements
None of these
Q237 Easy

Which is not the characteristic of CST element

The strain displacement matrix for CST element is a single term matrix
The variation of displacement field variable will be flat for CST element
The displacement function for CST is linear function
The strain remains constant over the element.
Q238 Easy

Identify the correct property of shape function

Summation of all shape function inside the body is +1
Summation of all shape function inside the body is -1
Summation of all shape function inside the body is zero
Summation of all shape function inside the body is infinity
Q239 Easy

For a 3D element, the boundary integral (Qi) for a finite element equation is a ______.

Surface integral
Line integral
Volume integral
None of these
Q240 Easy

How many types of elementary row operations?

1
2
3
4
Q241 Easy

Based on which parameter an polynomial function can be chosen______________

Nodes
Nodal points
Nodal displacements
Elements
Q242 Easy

Which of the following modules of FEA is used to determine natural frequency?

Static analysis
Thermal analysis
Modal analysis
Steady analysis
Q243 Easy

The stresses in the quadratic element are not ______

Linear
Uniform
Constant
Undefined
Q244 Easy

Axis-Symmetric element is

3D element only
2D element only
1D element only
Both 2D and 1D elements
Q245 Easy

For four noded serendipity elements which condition is true?

Nodes at corner only
Nodes on middle of the edges
One node must be at centre
Nodes anywhere on the element
Q246 Easy

Why do we need a Jacobian matrix in the finite element method?

The Jacobian matrix is required to determine displacements
The Jacobian matrix is required to determine stresses
The Jacobian matrix is required to determine strains
The Jacobian matrix is required to map the natural coordinate system to the cartesian coordinate system.
Q247 Easy

A1 is the first area and N1 is its shape function then shape function N1= ___

A-A1
A1/A
A1+A
A1
Q248 Easy

Is/are the phase/s of finite element method

Pre-processing
Solution
Post Processing
None
Q249 Easy

16 Sum of all shape functions is equal to

Zero
-1
+1
2
Q250 Easy

The sum of shape functions is always

1
Infinite
None
Showing 250 of 295 questions

Teachers: using these Finite Element questions with a class? Tell us about your class.

Report a mistake

What's wrong?