Skip to content

Manufacturing Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q301 Easy

What is one example of a revision?

Editing
Specifications
Research
Proofreading
Q302 Easy

What type of chart can be displayed in real-time with Mingo?

Histogram
Pareto Chart
Venn diagram
Q303 Easy

How does Welding Engineering contribute to the field of materials science?

Investigating the behavior of welded materials under different conditions
Developing new welding techniques for specific materials
Optimizing the weldability of different materials
All of the above
Q304 Easy

In the relation VTn = C, the value of n for carbide tools is

0.1 to 0.2
0.20 to 0.25
0.25 to 0.40
0.40 to 0.55
Q305 Easy

NC contouring is an example of

Continuous path positioning
Point-to-point positioning
Absolute positioning
Incremental positionin
Q306 Easy

What is a SKU typically controlled by?

The marketing side of a company
The business side of a company
The operational side of a company
The production side of a company
Q307 Easy

What is the term used to describe the company that specializes or focuses on the manufacturing or assembly of a part or all of a product?

Original Equipment Manufacturer
Contract Manufacturer
Distributor
Supplier
Q308 Easy

On which of the following just in time manufacturing philosophy emphasizes?

Man power
Profit
Inventory
Manufacturing
Q309 Easy

A manufacturing analytics platform can determine the availability of a machine by collecting and calculating what?

Percentage of done work
Downtime
Capacity utilization
Energy usage
Q310 Easy

What is the top-level assembly in the example given above?

Swimming Pool
Lawn Mower
John Deere tractor
Motorcycle
Q311 Easy

What is a common acronym for a Corrective Action Request?

CAPA
CAR
CRM
CAP
Q312 Easy

What is another name for Equipment Effectiveness?

Reliability
Effectiveness
OEE
WII
Q313 Easy

Which of the following is correct about ECG?

Burr-free sharpening of needles
Machining of soft metals like aluminium can be easily done
Lower MRRs when grinding hard, heat-sensitive materials
Difficult to machine materials with high hardness like tungsten carb
Q314 Easy

What is the primary purpose of heat treatment in metallurgical engineering?

To improve material strength and hardness
To enhance material corrosion resistance
To modify material microstructure and properties
All of the above
Q315 Easy

The patterns which are made in two or more pieces are called as

Solid pattern
Split patterns
Loose piece patterns
None of the above
Q316 Easy

What is the written record that documents and provides instruction for the steps included in a process or procedure?

Procedure Manual
Standard Operating Procedure
Procedure Sheet
Work Flow Chart
Q317 Easy

A CM is hired by a company to make or assemble what?

Its product
To inspect the product or part of the product
Its product or part of its product
To recommend changes to the product or part of the product
Q318 Easy

Segmental chips are formed during machining

Mild steel
Cast iron
High speed steel
High carbon steel
Q319 Easy

Where does CAD replace traditional methods?

Drafting
Printing
Computer aided design
Manufacturing
Q320 Easy

Mark is a physical mark listed on a product or its packaging to show the product's compliance with which?

A European Union requirement
A specific requirement
A general requirement
A U.S. requirement
Q321 Easy

What is a term for MTS?

Manufacturing Trade Statistic
Make to Stock
Mass Update Service
Machine Translation Service
Q322 Easy

What increases efficiency in the design phase?

Computer-aided design
Prototyping
Testing
Q323 Easy

What type of unit of measure describes how manufacturers use or buy a part?

UOM
CMT
LB
PPM
Q324 Easy

A 15 mm drilling machine means that it can drill a hole

Of maximum diameter 15 mm
In 15 mm thick plates
Having cross-sectional area of 15 mm2
None of these
Q325 Easy

Compliance refers to tracking whether or not a product complies with what?

Whether or not a product is safe
How much a company spends on researching and developing products
The company's stated policies
Government-imposed regulations or a company’s self-imposed standards
Q326 Easy

The welding process by Metal Inert-Gas (MIG) welding is

Slower than the welding process by Tungsten Inert-Gas (TIG) welding
Faster than the welding process by Tungsten Inert-Gas (TIG) welding
At same speed as the welding process by Tungsten Inert-Gas (TIG) welding
At unpredictable speed
Q327 Easy

Which of the following is an example of a non-ferrous metal?

Steel
Copper
Nickel
Cast iron
Q328 Easy

The decision of what parts to be manufactured and what parts to be purchased from market is taken in

Selection of manufacturing process
Process planning
Analysis of manufacturing system
None of the above
Q329 Easy

What does the term parent-child relationship describe?

A customer-supplier relationship
A peer-to-peer relationship
A service-provider relationship
An assembly-component or assembly-subassembly relationship
Q330 Easy

Castings are usually

Costlier than forgings
Cheaper than forgings
At the same rate as forging for similar metal
None of the above
Q331 Easy

What is the amount of time a plant or particular cell or line is down, or off-line, and not producing any product?

Suspended animation
A week
Shutdown
Downtime
Q332 Easy

What does CAM do for the manufacturing process that uses computer controlled machinery and software?

Automates any step
Minimizes Errors
Minimizes human error
Increases production
Q333 Easy

The material which on machining produces chips with built up edge is

Brittle material
Tough material
Hard material
Ductile material
Q334 Easy

What is a revision?

The act of making changes to a document after it has been created
A snapshot of a product, part, process, program, design or document at any moment in its development
The act of editing or reviewing a document for correction
The result of altering the content, structure or style of a document
Q335 Easy

What is the acronym for Bill of Materials?

BOM
BOMC
BOMD
Q336 Easy

What can a CAR request be used for?

Request changes
Prevent future issues
Locate a car
Trace a route
Q337 Easy

What is the process used to monitor and control processes?

Error Detection and Correction
Statistical Process Control
Error Theory
Queuing Theory
Q338 Easy

What is the name of the manufacturing terms that are given by the MWI?

Manufacturing work instructions
Manufacturing terms
Manufacturing process
Manufacturing specifications
Q339 Easy

What is the EEE Directive?

End-of-life electrical and electronic equipment directive
European Union directive on landfilled waste electrical and electronic equipment
Energy Efficiency and Conservation Directive
Waste electrical and electronic equipment directive
Q340 Easy

What is the marking of an assembly drawing or bill of materials to indicate a modification?

Yellow highlight
Redline
Blue line
Revision
Q341 Easy

What is a bill of materials organized into subassemblies that reflect the manufacturing process?

WBS
BOM
Bill of materials
Parts list
Q342 Easy

In CAD, what is replaced by software?

Computer generated images
Engineering drawings
Computer aided drawing
Traditional drafting methods
Q343 Easy

Which of the following is an example of thermoplastic material?

Camera bodies
Automobile parts
Electric plugs
Electric insulation
Q344 Easy

What is another name for Good manufacturing practice?

ISO 9001
ISO 14001
HACCP
GMPs
Q345 Easy

What is an example of a standard operating procedure?

Standard Operating Procedure
Protocol
Procedure
SOP
Q346 Easy

The foundation of the centre lathe is called as

Carriage
Tray
Base
Bed
Q347 Easy

For manufacturing of a certain amount of hole, maximum hole size was found to be 50.14 mm and minimum hole size was found to be 49.98. What will be the Tolerance in mm?

0.14
0.15
0.16
0.17
Q348 Easy

What does the change management process involve?

Creating, reviewing and gaining formal approval for engineering change requests, change orders and change notifications
Coordinating with other business units to ensure compatibility of changes
Ensuring that all stakeholders are aware of the proposed changes and have an opportunity to provide feedback
Preparing the ground for change by creating a change management plan
Q349 Easy

When was the Eucom Directive issued?

2002/98
1993
2003/01
2002/96
Q350 Easy

What does a BOM include that represents different steps in the assembly process?

Subassemblies
Bill of materials
Parts
Packages
Showing 350 of 356 questions

Teachers: using these Manufacturing Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?