Skip to content

Civil Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q101 Easy

Which is the best example of a temporary load imposed on a structure?

Dead load
Environmental load
Service load
Live load
Q102 Easy

The tunnels, the artificial underground passages are constructed for:

Sewerage
Water supply project
All these
Highways
Q103 Easy

Which type of joint is used to make wooden floors?

Lap joint
Tongue & Groove joint
Dovetail joint
Q104 Easy

Critical practices to control the amount of solid waste include __________.

Reduce, reuse, recycle, compost
Reduce, remove, recycle, compact
Reduce, sort, recycle, compact
None of the above
Q105 Easy

____________ is called the undersurface of a stair.

Soffit
Drip course
Dome
Waiste
Q106 Easy

In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by

Adding 180°, if the given bearing is less than 180°
None of these
Changing the cardinal points, i.e. substituting N for S and E for W and vice-versa
Subtracting 180°, if the given bearing, is more than 180°
Q107 Easy

The radius of curvature of the arc of the bubble tube is generally kept

10 m
25 m
100 m
50 m
Q108 Easy

Which of the following is NOT a steel structural shape?

Z shaped cross section
L shaped cross section
I shaped cross-section
V shaped cross-section
Q109 Easy

The Stressed Ribbon Bridge is a type of

suspension bridge
beam bridge
arch bridge
truss bridge
Q110 Easy

The soil which offers minimum resistance to the flow of electric current is known as _______.

marshy ground
clay
sandy loam
silty loam
Q111 Easy

What is the value of the minimum depth for laying foundations below the ground level?

20 centimeters
50 centimeters
70 centimeters
100 centimeters
Q112 Easy

What is the compactness coefficient of a drainage basin with perimeter P and area A?

a)
b)
C)
d)
Q113 Easy

The useful moisture of soil, is equal to its

Difference between filed capacity and permanent wilting point within the root zone of plants.
Saturation capacity
Moisture content at permanent wilting point
Field capacity
Q114 Easy

The _________ helps in reducing the shrinkage of concrete.

reduction in temperature
sand content of the mixture
water content of the mixture
cement in the mixture
Q115 Easy

Sewage is unloaded at the point of treatment through which of the following types of sewer systems?

Lateral sewer
lntercepting sewer
Outfall sewer
Main sewer
Q116 Easy

How do we describe the study of soil, its behavior and application as an engineering material?

Soil engineering
Soil Surveying
Soil mechanics
Soil evaluations and calculations
Q117 Easy

Which of these measuring devices measures non-georeferenced displacements?

Geotechnical measuring devices
Geodetic measuring devices
Q118 Easy

Effective stress of soil is the difference in the soil's total stress and its:

pore water pressure
shear strain
irregular stress
relative density
Q119 Easy

Calculate the percentage decrease in the volume of sludge when the moisture content of sludge in a sludge digestion tank is reduced from 80% to 60%.

30%
40%
50%
60%
Q120 Easy

Which type of cement has a final setting time of 30 minutes?

Quick setting cement
Rapid hardening cement
High alumina cement
Low heat cement
Q121 Easy

In a steel structure, what is an under-reinforced section?

Section in which steel reaches its maximum stress after concrete reaches its maximum stress.
Section in which steel does not reach its maximum stress.
Section in which steel reaches its maximum stress earlier than concrete reaches its maximum stress.
Section in which steel and concrete reach their maximum stress at the same time.
Q122 Easy

A hydraulic structure is designed to withstand

All these
Seepage forces
Hydraulic jump
Hydraulic pressure
Q123 Easy

What is one element of building materials that can contribute to increased energy efficiency?

Load bearing capacity
Moisture absorption rate
Long term cost
Thermal storage capacity
Q124 Easy

The necessary condition in Permissible Stress Design is that stresses developed in a structure due to service loads do not exceed the:

limit state
beam coefficient
elastic limit
Q125 Easy

The performance of a specific task in CPM, is known

Contract.
Activity
Event
Dummy
Q126 Easy

Critical path lies along the activities having total float

Negative
Positive
Same.
Zero
Q127 Easy

When two metals form a galvanic cell, which one will oxidize first?

The more anodic metal
The more cathodic metal
The galvanized metal
The weaker metal
Q128 Easy

An ideal vertical curve to join two gradients, is

Elliptical
Hyperbolic
None of these
Parabolic
Q129 Easy

A beam in which the tension capacity of the tension steel is greater than the combined compression capacity of the concrete and the compression steel is called:

balanced-reinforced beam
under-reinforced beam
over-reinforced beam
Q130 Easy

Modular co-ordination of construction means proper

Designing
All these
Planning
Execution
Q131 Easy

___________ is an obstruction in the bed of a stream in order to make the water flow into a nearby channel.

Sudden fall
Bifurcation channel
Distribution channel
Diversion work
Q132 Easy

Which of these is considered a hazardous building material?

concrete
lime cement
asbestos
wood
Q133 Easy

The factor of safety of a building is:

yield stress / working stress
yield stress + working stress
yield stress – working stress
yield stress x working stress
Q134 Easy

A curve headed groin is known as __________.

Burma groin
Hockey groin
Meandering groin
Denehy groin
Q135 Easy

The strap efficiency of a reservoir is a function of:

Reservoir capacity / total inflow
Reservoir capacity – total inflow
Reservoir capacity + total inflow
Total inflow / reservoir capacity
Q136 Easy

If M is the bending moment, E is the modulus of elasticity and I is the polar moment of Inertia then, what is the value of the strain energy stored by an elastic member which is subjected to bending?

∫M² + Ei ds
∫M² / 2Ei ds
∫M² + 2Ei ds
Q137 Easy

A canal must be aligned along the ___________ for optimum utilization.

ridge line
contour line
dutch line
inundation line
Q138 Easy

What is the function of interior partions in structural design?

Walls and ceilings
Load distribution
Energy conservation
Space planning
Q139 Easy

Slab-on-grade foundation is a type of

shallow foundation
deep foundation
Q140 Easy

____________ when water is added to the cement.

Heat is absorbed
Heat is generated
All impurities are washed out
Q141 Easy

In a concrete slab, the value of the reinforcement is taken as ___.

2%
3%
4%
5%
Q142 Easy

Henry Gantt developed Bar charts for planning and scheduling of projects in

1940
1900
1880
1950
Q143 Easy

In a constant head parameter test of 5 minutes duration, the quantity of water collected is 450 milliliters. Calculate the discharge per unit time.

1 milliliter per second
2 milliliters per second
1.5 milliliters per second
2.5 milliliters per second
Q144 Easy

What is the value of the uniformity coefficient of soil?

D60 / D10
D40 / D20
D50 / D10
D70 / D10
Q145 Easy

In an RCC structure, the value of modular ratio for design is _______.

10
15
20
25
Q146 Easy

A pitot tube is used to measure

velocity of flow
difference in pressure
pressure
none of these.
Q147 Easy

Stoke's law sates that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon

Shape and size of grain
Shape, size and weight of grain
Shape of grain
Size of grain
Q148 Easy

Which of the following does not have columns in internal occupied spaces?

Wide Span Building
Wide Styled Construction
Open Styled Construction
Clear Span Building
Q149 Easy

How is thermal expansion accomodated in metallic structure design?

Rubber cushioning
Dead space
Expansion joints
Building gaps
Q150 Easy

Which step comes first after casting concrete?

Troweling
Curing
Floating
Screeding
Showing 150 of 233 questions

Teachers: using these Civil Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?