Skip to content

Civil Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q151 Easy

Which of the following would be considered a composite building material?

Stone
Granite
Engineered wood
Iron
Q152 Easy

Which grade of brick can withstand below freezing temperatures in moist climate?

Grade SW
Grade MW
Grade NW
Q153 Easy

As soil clay content increases, what happens to the plastic limit?

It decreases
It increases
It remains the same
Q154 Easy

Which factor among the following is used to determine the workability of concrete?

theoretical weight of sample / actual weight of sample
actual weight of sample / theoretical weight of sample
actual weight of sample – theoretical weight of sample
theoretical weight of sample + actual weight of sample
Q155 Easy

Which one of the following methods is generally adopted for tunnelling in firm ground

Full face method
All these
Top heading and benching method
Drift method
Q156 Easy

__________ is used/done to check the strength of the concrete by virtue of the sound it makes.

Le chatelier apparatus
Compression test
Shores test
Vicat apparatus
Q157 Easy

For B.G. single track railway, the height of the tunnel above top of rails should be

6.7 m to 7.3 m
5.8 m to 6.2 m
5.5 m to 5.8 m
7.3 m to 7.5 m
Q158 Easy

The quantity of seepage of water through soils is proportional to

Neither coefficient of permeability of soil nor total head loss through the soil
Coefficient of permeability of soil
Total head loss through the soil
Both coefficient of permeability of soil and total head loss through the soil
Q159 Easy

________________ is the line having zero declination.

Isogonic line
Magnetic line
Agonic line
Isometric line
Q160 Easy

What is used to embed rebars in masonry walls?

grout
coal ash
calcium
fly ash
Q161 Easy

What factor should be considered when selecting a building material?

Elastic properties
Temperature stresses
(All of these)
Factor of safety
Q162 Easy

Who initiates and funds a construction project and appoints the rest of the construction team?

An engineer
A contractor
An owner
An architect
Q163 Easy

What is the purpose of utility system modeling and simulation in Utility Engineering?

Assessing system performance under different operating conditions
Identifying potential system bottlenecks and inefficiencies
Optimizing system design and operation
Analyzing customer utility consumption trends
Q164 Easy

Concrete is reinforced to help withstand what force upon it?

Tensile force
Compression force
Gravity
Fracturing
Q165 Easy

The time which results in the leasi, possible construction cost of an activity, is known

Crash time
Standard time.
Normal time
Slow time
Q166 Easy

Which method of irrigation artificially raises the water table to allow the soil to be moistened from below the plants' root zone?

center-pivot irrigation
secondary soil irrigation
localized irrigation
sub-irrigation
Q167 Easy

By definition, what is the water filling percentage of soil pore volume for saturated soil?

80%
75%
above 50%
100%
Q168 Easy

_____________ is the process of addition of a layer of cement mortar to the surface of concrete.

Flashing
Punning
Rodding
Rendering
Q169 Easy

What is the intensity of the active earth pressure at a depth of 10 meters, given that the coefficient of active earth pressure is 3 and the unit weight of dry sand is 2 tonnes per cubic meter?

15 tonnes per square meter
16 tonnes per square meter
32 tonnes per square meter
60 tonnes per square meter
Q170 Easy

What is Actual Possession?

Possession which one intends to sell in the future
Possession which one has previously owned
Possession which consists of actual physical occupation of property
Possession which is legally recognized as one's own
Q171 Easy

What effect will the addition of calcium chloride have on concrete?

acceleration of hardening process
anticorrosion
slowing down of hardening process
strengthening of reinforced concrete
Q172 Easy

What is the term used for the systematic measurement of the alteration in the shape or dimensions of a structure as a result of stresses induced by applied loads?

structural load analysis
deformation survey
durability survey
dimensional survey
Q173 Easy

In soil, the ratio of volume of voids to the total volume is called:

saturation ratio
dry density
soil buoyancy
porosity
Q174 Easy

The theoretical point of failure for a structure under design loads is called

permissibility point
ultimate limit state
load limit index
failure state limit
Q175 Easy

The object of technical planning, is

Preparation of estimates
All these
Taking remedial action for likely bottleneck in the execution
Initiating the procurement action of resources
Q176 Easy

What purpose to gravel or crushed rock serve in a concrete mix?

Binder
Slag
Agreggate
Cement
Q177 Easy

Which type of cement among the following is capable of withstanding high temperatures?

Refractory cement
Super sulfated cement
Expanding cement
Rapid hardening cement
Q178 Easy

Slow sand filtration effectively removes _________.

Giardia lamblia.
Crytosporidium parvum.
Most heavy metals.
Viruses
Q179 Easy

What creates an Aeolian effect on soil?

Ice
Wind
Water
Gravity
Q180 Easy

Pick up the incorrect statement from the following. Culturable commanded area is the gross area of an irrigation canal system less

Fallow land
Alkaline area
Forest area
Populated area
Q181 Easy

__________ is the portion of a wall which is used to support an arch.

Lintel
Jamb
Abutment
Foot back
Q182 Easy

How does the basic ratio of span/effective depth influence the design of reinforced concrete structures?

Determines the sizing and spacing of beam and slab construction
Determines how many levels a structure can support
Determines how large a structure can be
Determines the strength of reinforced concrete
Q183 Easy

The portion of a brick cut across the width, is called

half brick
bat
bed
closer
Q184 Easy

The water content of soil is defined as the ratio of

Weight of water to weight of air in voids
Volume of water to volume of given soil
Weight of water to weight of solids of given mass of soil
Volume of water to volume of voids in soil
Q185 Easy

Geologic cycle for the formation of soil, is

Weathering → transportation → deposition → upheaval
Transportation → upheaval → weathering → deposition
None of these.
Upheavel → transportation → deposition → weathering
Q186 Easy

Solids in wastewater treatment are removed in ________.

Pre-treatment
Primary treatment
Secondary treatment
Tertiary treatment
Q187 Easy

True or False: The coefficient of expansion of concrete is much greater than that of steel.

False
True
Q188 Easy

Agriculture that relies only on rainfall and not on irrigation is known as:

wetland farming
dryland farming
Q189 Easy

The fluid generally used for grouting is

Cement and water mix
Sodium silicate
All these
Clay suspension
Q190 Easy

Curing is the process of what?

Heating drying strengthening
Watering
Q191 Easy

Buoyant unit weight equals the saturated density

Minus unit weight of water
Divided by unit weight of water
Multiplied by unit weight of water
Plus unit weight of water
Q192 Easy

___________ line joins the vertices of the trusses.

Sky
Top
Pitch
Ridge
Q193 Easy

Which of these is a Concrete Slab Restoration Method used for roads?

slab stabilization
transverse patching
erosion dam
concrete rebalancing
Q194 Easy

What type of building materials are able to absorb high amounts of latent heat?

Phase change materials
Cool temperature materials
Porous materials
Green materials
Q195 Easy

What is another term for groundwater hydrology?

water-table analysis
hydrogeology
Q196 Easy

Pervious concrete is a kind of concrete containing little to no

fine aggregates
large aggregates
admixture
chemical binder
Q197 Easy

For a building, the wind pressure and wind velocity are related as:

wind pressure / (wind velocity)²
wind pressure x (wind velocity)²
wind pressure - wind velocity
(wind pressure)² / wind velocity
Q198 Easy

Pick up the correct statement from the following during tunnel excavation,

Hydrogen sulphide should not be more than 0.001%
Carbon mono-oxide should not be more than 0.01%
Oxygen should not be less than 19.5%
All of these
Q199 Easy

What is the civil engineer's term for the unaggregated or uncemented deposits of mineral and/or organic particles covering large portion of the earth's crust?

Dirt
Ground
Soil
Earth
Q200 Easy

In a joint, the number of rivets required is calculated by using the formula ____________.

force / bearing strength of rivet
force – bearing strength of rivet
force / rivet value
force – rivet value
Showing 200 of 233 questions

Teachers: using these Civil Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?