Skip to content

Civil Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q201 Easy

The main principle of surveying is to work

From whole to the part
From lower level to higher level
From higher level to the lower level
From part to the whole
Q202 Easy

The technique of determining the terrestrial position of points and the distances and angles between them is called

surveying
plotting
ground analysis
charting
Q203 Easy

What is the value of the angle of intersection of a contour and a ridge line?

45°
90°
120°
150°
Q204 Easy

The seepage force in a soil, is

Perpendicular to the equipotential lines
All these
Proportional to the head loss
Proportional to the exit graident
Q205 Easy

Which form of lime among the following hardens due to the absorption of carbon dioxide in the atmosphere?

Lump lime
Quick lime
Fat lime
Hydraulic lime
Q206 Easy

A pressure hypsometer works on the phenomena:

of reflection of sound waves.
of high frequency radio waves.
that boiling point varies with altitude.
of electromagnetic waves.
Q207 Easy

Name the type of connection in which the steel column can rotate but not move up, down, right or left.

Top Connection
Pin Connection
Fixed Connection
Welded Connection
Q208 Easy

Works costing less than Rs. 20,000 are treated as

All these
Major projects
Minor projects
Projects
Q209 Easy

What is percolation coefficient?

Loss of head – loss of creep
Loss of creep + loss of head
Loss of head x loss of creep
Loss of head / loss of creep
Q210 Easy

Under-reamed piles are generally

All these
Bored piles
Precast piles
Driven piles
Q211 Easy

Which of the following would be calculated into the design of a reinforced concrete structure?

Wind load
Erosion
Building capacity
Concrete shrinkage
Q212 Easy

Which of the following characteristics make the use of steel popular in the construction of skyscrapers?

High Heat Conductivity
High Strength to Weight Ratio
Resistance to Corrosion
Q213 Easy

___________ is the extension of the wall above the roof level.

Retaining wall
Post wall
Chock wall
Parapet wall
Q214 Easy

True or False: Concrete has high tensile strength but low compressive strength.

True
False
Q215 Easy

What is the meaning of "adjoining"?

Adjoining property is two pieces of land that share a common interest.
Adjoining property is two pieces of land that are in the same general vicinity.
Adjoining property is two pieces of land that share a common border.
Adjoining property is two pieces of land that are adjacent to each other.
Q216 Easy

A sextant is a device capable of measuring angles up to _____.

90°
100°
110°
120°
Q217 Easy

What is the value of the ratio of compressive strength of concrete to its tensile strength?

10
20
25
30
Q218 Easy

The deflection of any rectangular beam simply supported is

directly proportional to the cube of its length
none of these
inversely proportional to its width
inversely proportional to the cube of its depth
Q219 Easy

What is added to normal concrete in order to make RCC?

rebar
limestone
blended cement
coarse aggregate
Q220 Easy

Back fill with a sloping surface exerts a total active pressure Pa on the wall of height H and acts at

H/2 above the base parallel to base
H/4 above the base parallel to base
H/3 above the base parallel to base
H/5 above the base parallel to base
Q221 Easy

Irrigation allowed farms to be _____ rivers.

Below
Under
On
Farther from
Q222 Easy

What factor is important to resist freeze-thaw effect on concrete?

Rebar design
Mixture viscosity
Vacuum seal
Air entrainment
Q223 Easy

The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known

Liquid limit
Permeability limit
Plastic limit
Shrinkage limit
Q224 Easy

Which of the following equipments are used for distance measurement.

Geodimeter
Tellurometer
Theodolite
Planimeter
Q225 Easy

Time and progress chart of a construction, is also known as

Gantt chart
All these
Bar Chart
Critical path method chart
Q226 Easy

The structure which is used to support a vertical cladding is known as ____________.

runner
flange
purlin
joist
Q227 Easy

____________ is the value of sensitivity of a rigid module.

0.25
0.20
0.30
0.15
Q228 Easy

Failure of the stability of slopes, generally occurs along

A curved surface
All the surfaces
A horizontal surface
Slip plane
Q229 Easy

What is the name for an auxiliary dam constructed to confine the reservoir created by a primary dam?

saddle dam
Weir
check dam
wing dam
Q230 Easy

____________ is the ratio of the weight of the soil solids to the volume of the soil mass.

Moisture content
Dry density
Void ratio
Porosity
Q231 Easy

What determines how well concrete will flow when being mixed?

The flow ratio
The rheological property
The pour point
The static property
Q232 Easy

In terms of surveying for distance measurements, what does EDM stand for?

Earth distance measurement
Estimated distance measurement
Electromagnetic distance measurement
Elevation distance measurement
Q233 Easy

The horizontal sections of a steel frame are the ____________.

Brick pier.
Sill plate.
Jack stud.
Beam or girder.

Teachers: using these Civil Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?