Skip to content

Mechanical Engineering MCQ Questions

0
Answered
0
Correct
0%
Accuracy
Q151 Easy

Which device is used to store rotational energy?

generator
flywheel
motor
Q152 Easy

Which of these is NOT a state function?

pressure
heat
temperature
volume
Q153 Easy

A shorter electromagnetic wave is _____.

More powerful
Less powerful
Hotter
Colder
Q154 Easy

True or False: A perfect Carnot heat engine cannot be built in reality.

False
True
Q155 Easy

What is the value of the standard molar enthalpies of formation at 298K of NaCl(s)?

-411.15 kJ/mol
-227.83 kJ/mol
-1125.64 kJ/mol
-646.28 kJ/mol
Q156 Easy

Which engineering principle is applied in the design of suspension systems in vehicles?

Fluid dynamics
Thermodynamics
Kinematics and dynamics
Electrical circuit theory
Q157 Easy

Which of the following is an example of an advanced driver-assistance system (ADAS)?

Power steering system
Antilock braking system (ABS)
Adaptive cruise control
Fuel injection system
Q158 Easy

When referring to flexible manufacturing, it is true that it ________.

No warning
Just-in-time
Equal in quality and capability in all participating countries
Uses machines designed to perform multiple tasks so they can be used to produce a variety of products
Q159 Easy

What is the value of the point angle of a twist drill?

118º
150º
106º
100º
Q160 Easy

Primary controls include the gearshift lever, steering wheel, and _______________.

Accelerator
Radio
Ignition
HVAC.
Q161 Easy

How is the heat energy that changes the state of an object but not its temperature described?

Superheat
Latent heat
Sensible heat
Thermal heat
Q162 Easy

In which, among the following engine strokes, is the firing of the vaporized fuel carried out?

suction stroke
expansion stroke
exhaust stroke
compression stroke
Q163 Easy

What describes the effect of a material expanding in the directions perpendicular to its direction of compression?

Poisson Effect
Bellowing effect
Newton effect
Accordion effect
Q164 Easy

The bolt and nut is an example of a:

turning pair
rolling pair
screw pair
spherical pair
Q165 Easy

Which plant layout is known as 'functional layout' or 'analytical layout'?

Process layout
Product layout
Fixed position layout
Q166 Easy

Which fan configuration is designed to add energy to airflow passing straight through the fan blades?

Centrifugal fan configuration
Axial fan configuration
High velocity fan configuration
Vortex fan configuration
Q167 Easy

Which term is used to describe the angle of the cutting face relative to the cutting work?

Slice angle
Strike angle
Leverage angle
Rake angle
Q168 Easy

What is the term for the ability of a material to withstand the force of being pulled apart?

Tensile strength
Shear strength
Elasticity
Flexibility
Q169 Easy

________ involves the use of computers to direct manufacturing processes.

Effective capacity
Process control
Productivity
Computer-aided manufacturing
Q170 Easy

In method study, what does an inverted triangle symbol in a process chart represent?

Inspection of materials
Transport of materials
Storage of materials
Operation of materials
Q171 Easy

Two springs having stiffness 5 and 10 respectively are connected in series. Calculate the combined stiffness of the two springs.

20/3
30/4
10/3
15/2
Q172 Easy

What is the amount of heat absorbed if two litres of an ideal gas at a pressure of 10 atm expands isothermally into a vacuum until its total volume becomes 10 liters?

8 liter-atm
4 liter-atm
6 liter-atm
No heat is absorbed
Q173 Easy

True or False: Vapour compression used in most household refrigerators is a non-cyclic process.

True
False
Q174 Easy

The production manager is responsible for all of the following except ________.

Setting schedules
Making buying decisions
Overseeing quality control
Preparing financial reports
Q175 Easy

What is the measure of a fluid's resistance to gradual deformation by shear stress or tensile stress?

viscosity
fluidity
buoyancy
fluid tension
Q176 Easy

Mechanical solidarity is to gemeinschaft as ________ solidarity is to gesellschaft.

Organic
Tribal.
Folk.
Natural.
Q177 Easy

Approximately how much does one gallon of water weigh?

.433 lbs
16.24 lbs
64 lbs
8.33 lbs
Q178 Easy

The reduction in effectiveness of a vehicular brake is called:

smooth-out
drag
brake fade
force fade
Q179 Easy

Total mechanical energy is the sum of what two forms of energy?

Kinetic Energy and Potential Energy
Used energy and unused energy
Mechanical energy and electrical energy
Static energy and dynamic energy
Q180 Easy

Which of these is a turbine for hydro power?

Carnot wheel
Ericsson wheel
Pelton wheel
Q181 Easy

Calculate the specific heat of a gas at constant volume, given that the mass of the gas is 100 kilograms, the initial temperature of the gas is 20 kelvins and the finaltemperature of the gas is 50 kelvins. The total heat supplied to the gas is 105 kilojoules.

30 joules per kg per kelvin
35 joules per kg per kelvin
40 joules per kg per kelvin
45 joules per kg per kelvin
Q182 Easy

Which value must be calculated into piping system designs?

Expansion denominator
Expansion derivative
Expansion estimate
Expansion coefficient
Q183 Easy

What is the role of automotive engineers in vehicle safety?

Developing marketing strategies for vehicle sales
Ensuring compliance with emission regulations
Designing and testing safety features and crashworthiness
Optimizing fuel efficiency and reducing carbon emissions
Q184 Easy

What type of loading is applied to a coil spring in compression?

Tension
Torsion
Bending
Compression
Q185 Easy

What are the three basic methods of heat tranfser?

Thermal, Osmosis and Linear
Steam, Flame and Hydronic
Tactile, Friction, and Combustion
Conduction, Convection and Radiation
Q186 Easy

What is the density of water?

500 kg/m^3
4000 kg/m^3
1 kg/m^3
1000 kg/m^3
Q187 Easy

If M - bending moment, I - moment of inertia, E - young's modulus of elasticity and R - radius of curvature then, which of the following is the correct bending equation for a beam?

M/I = R/E
M/I = R/E
M/I = E/R
Q188 Easy

What is a term for heat transfer between two objects in contact, driven by a constant temperature difference?

convection
steady state conduction
constant diffusion
advection
Q189 Easy

Cooling tons are calculated as the amount of heat energy needed to turn one ton of ice into water over what time period?

1 hour
24 hours
8 hours
12 hours
Q190 Easy

Which engineering discipline is closely related to automotive engineering?

Electrical engineering
Mechanical engineering
Chemical engineering
Aerospace engineering
Q191 Easy

Which branch of engineering mechanics deals with the force which acts upon bodies at rest?

Statics
Dynamics
Kinetics
Kinematics
Q192 Easy

_______________ is a beam having its end portion extended beyond the support.

Cantilever beam
Simply supported beam
Overhanging beam
Continuous beam
Q193 Easy

How do we describe the property of an object or material which will restore it to its original shape after distortion?

Strength
Elasticity
Rigidity
Flexibility
Q194 Easy

Consider a circular hollow tube made of steel which is used for supporting a compressive load of 600 kN. The inner diameter of the tube is 90 mm and the outer diameter is 130 mm. What is the compressive stress, if the length of the tube is 1000 mm?

-92.1 MPa
-102.5 MPa
-86.8 MPa
-79.3 MPa
Q195 Easy

Which stress acts in parallell with the cross section of a material?

shear
compression
normal
tension

Teachers: using these Mechanical Engineering questions with a class? Tell us about your class.

Report a mistake

What's wrong?