If the normal cross-section of a member is subjected to tensile force , the resulting normal
A force is completely defined when we specify
The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force acting along the circumference, is known as
A cast iron T section beam is subjected to pure bending. For maximum compressive stress to be three times the maximum tensile stress, centre of gravity of the section from flange side is
A body moves, from rest with a constant acceleration of 5 m per sec. The distance covered in 5 sec is most nearly
Which of the following is not the unit of energy?
When it is indicated that a member is elastic, it means that when force is applied, it will
What does yield strength indicate that a material will not return to?
In the equation of virtual work, following force is neglected
The maximum stress produced in a bar of tapering section is at
A column is said to be of medium size if its slenderness ratio is between
For a beam having fixed ends, the unknown element of the reactions, is
Influence lines are drawn for structures
For a beam of uniform strength keeping its depth constant, the width will vary in proportion to
Maximum deflection of a cantilever due to pure bending moment M at its free end, is
Which of the following is not a vector quantity?
In a simply supported truss carrying vertical loads, what is the nature of the stress in the bottom horizontal (chord) members?
The stress developed in a material at breaking point in extension is called
Longitudinal stress in a thin cylinder is
What is the opposite of ductility?
Poisson's ratio is used to measure what?
Which of the following is a vector quantity?
A beam is said to be of uniform strength, if
A simply supported beam (l + 2a) with equal overhangs carries a uniformly distributed load over the whole length, the B.M. changes sign if
In the lever of third order, load W, effort P and fulcrum F are oriented as follows
The materials which have the same elastic properties in all directions, are called
A body moves, from rest with a constant acceleration of 5 m per se The distance covered in 5 sec is most nearly
In a three hinged arch, the third hinge is generally kept at
If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by
The type of butt joints in common use, is:
The C.G. of a plane lamina will not be at its geometrical centre in the case of a
Which of the following is not the unit of power?
The ratio of lateral strain to the linear strain within elastic limit is known as
The deformation per unit length is called
What is a synonym for "strength of materials"?
Strain is defined as the ratio of
The moment diagram for a cantilever whose free end is subjected to a bending moment, will be a
A steel rod of 2 cm diameter and 5 metres long is subjected to an axial pull of 3000 kg. If E = 2.1 ×106, the elongation of the rod will be
Stress in a beam due to simple bending, is
The value of Poisson's ratio always remains
The shape of the bending moment diagram over the length of a beam, carrying a uniformly distributed load is always
The resolved part of the resultant of two forces inclined at an angle in a given direction is equal to
Pick up the incorrect statement from the following:
Metal patterns are used for
The property by which a body returns to its original shape after removal of the force, is called
What does a stress strain diagram show?
Tensile strength of a material is obtained by dividing the maximum load during the test by the
The C.G. of a right circular solid cone of height h lies at the following distance from the base
What is Strain?
The maximum compressive stress at the top of a beam is 1600 kg/cm2 and the corresponding tensile stress at its bottom is 400 kg/cm2 . If the depth of the beam is 10 cm, the neutral axis from the top, is
Teachers: using these Strength of Materials questions with a class? Tell us about your class.